Perhaps unsurprisingly given my "recovering a Buffalo Linkstation" post from September last year, come the start of January I have a dead Buffalo Linkstation HS-DH750GL as it died again.
After the September experience I had instigated fairly regular "Sync Toy" runs to back up the Linkstation HS-DH750GL to a WD MyCloud and a Synology NAS DS216se.
The way I worked, the Linkstation HS-DH750GL was my "working" store so when it broke I was only a few days of data lost but it was unfortunate.
Investigation suggested that the drive was OK and when I put it in a USB caddy and connected it to my Raspberry Pi, to my immense surprise the data partition "mounted" and all my files were there.
The drive isn't easily visible on a Windows machine as it has a Linux format and partition scheme.
I had a spare 1TB drive (the WD Blue that my PC seemed to not like) and so bought another Synology NAS case (a DS115j this time) and fitted it to that.
After an hour of Synology initiation "stuff" it was all up and running with an empty 1TB drive. Unlike the old WD Blue 650GB there are no S.M.A.R.T. error reports on the 1GB drive so it seems OK to use.
The Synology NAS drive was seen by the Raspberry Pi as a server and by copy and paste I set the Raspberry Pi to clone the ex Linkstation 750GB drive (about 600GB of stuff) to the Synology NAS.
It isn't fast (about 48 hours) but is doing it..
Once I've got the data all on the new Synology, I'll have another go with the Linkstation HS-DH750GL but I think the PSU might be on the way out. There is a bit of a "capacitor" smell to it.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment